Improve your experience. We are very sorry but this website does not support Internet Explorer. We recommend using a different browser that is supported such as Google Chrome or Mozilla Firefox.

HRW CB - Licence to Operate a Bridge & Gantry Crane - TLILIC0016

TLILIC0016 HRW Licence to Operate a Bridge and Gantry Crane, Nationally Recognised Training

Description

This Nationally recognised High Risk Work CB course covers the operation of a bridge and gantry crane controlled from either Remote/Pendent or Cabin Control. 

If the hook on Bridge and Gantry crane has more than 3 powered movements then the TLILIC0016-CB HRW Licence is required to operate a bridge & gantry crane.

 

COURSE TOPICS 

  • Requirements for HRW Licence
  • WH&S Legislation (Acts, Regulations and Duty of Care)
  • Application of Australian Standards and National Standards.
  • Pre-operational checks
  • Planning your work
  • Safe slinging
  • Safe operational procedure
  • Signals and communication
  • Shut down procedure
  • HRW licence application process

 

PREREQUISITES & HRW LICENCE ASSESSMENT REQUIREMENTS 

To enrol in this course participants must:

  • Be a minimum of 18 years of age
  • Bring 100 points of identification on the first day of the course and on the assessment day. If using a birth certificate or a passport, it must be the original evidence of identity document, a photo of the document will not be accepted, a photo of a driver's licence, high-risk work licence, and Medicare card on the NSW service site on your phone is acceptable.

The link below outlines the acceptable evidence of identity and points value:

https://www.safework.nsw.gov.au/__data/assets/pdf_file/0005/51836/SW08446-0718-423971.pdf

  • Participant's identification must show a NSW residential address, if you are an interstate participant an exemption must be in place before you can undergo the assessment
  • Inform IWP if you are an accredited SafeWork NSW licenced assessor, an exemption must be in place before you can undergo the assessment
  • To allow for adequate time for an exemption to be granted please notify IWP during enrolment as we can assist with the exemption process.
  • Demonstrate the ability to speak and write English to a basic level & have basic numeracy skills
  • Be able to speak English well enough to carry out high-risk work safely with other people, please inform us upon registration if you feel you have any literacy or numeracy difficulties. Some reasonable adjustments to the course can be made to assist.

 

COURSE DURATION

  • 4 Days

 

PARTICIPANTS WILL NEED TO BRING

  • 100 points of identification as listed in the prerequisites for this course
  • Bring your own food, free water, tea, coffee & biscuits are provided, you will be able to leave the facility during your lunch break if you wish
  • PPE including protective footwear will be required to be worn for the practical training sessions and the SafeWork NSW assessment, we have hard hats, high visibility vests, gloves & whistles available for use if required.

 

ASSESSMENT PROCESS

  • The course is based on the requirements of the national standards for licencing persons performing high-risk work, the training will be a combination of knowledge, calculations & practical training where participants will be required to demonstrate industry skills & knowledge described in the units of competency included in this course.
  • On completion of the training, an RTO assessment will be conducted, this assessment will identify if the participant is ready to undergo the SafeWork NSW assessment, or if further training is required.
  • To pass the SafeWork NSW assessment, all critical components must be demonstrated and answered correctly

 

COURSE OUTCOME

On successful completion of the SafeWork NSW assessment, participants will be given a:

  • Nationally recognised statement of attainment TLILIC0016 HRW Licence to Operate a Bridge and Gantry Crane, recognised within the Australian Qualifications Framework and issued under the authority of the National Vocational Education and Regulator Act 2011
  • A SafeWork NSW licence to perform high-risk work application form is to be lodged at Australia Post within 60 days of the completion of the assessment.

 

MAXIMUM PARTICIPANTS

  • 8 people 

 

UNIT OF COMPETENCY

  • TLILIC0016 HRW Licence to Operate a Bridge and Gantry Crane

 

PRICE

  • $1300
  • For your registration into a course to be approved, all course fees are required to be paid in full at the time you make your booking.

 

PAYMENT OPTIONS

  • CREDIT CARD - over the phone or the ONLINE CREDIT CARD payment option through our website (preferred) 1.75% surcharge will apply 
  • EFTPOS
  • INVOICE (an approved 7-day credit application must be in place, available to corporate customers only)
  • Individuals registering for a course must use the credit card payment option

 

REFUND POLICY

 

RECOGNITION OF PRIOR LEARNING (RPL)

  • Participants should speak with the IWP administration team at the time of enrolment to further discuss this option

 

IWP CONTACT DETAILS & RTO INFO

  • Address: 37 Kemblawarra Road Warrawong NSW 2502
  • Phone: 02 42743864
  • Email: admin@iwpt.com.au
  • Website: https://www.iwpt.com.au
  • RTO Code 91671
  • ABN 18133156993

 

 

Similar courses

HRW CO, Licence to Operate a Slewing Mobile Crane (Over 100 Tonnes) - TLILIC0020

TLILIC0020 HRW Licence to Operate a Slewing Mobile Crane Over 100 Tonnes (CO), Nationally Recognised Training

More Information
Operate a Gantry or Overhead Crane Remote/Pendant Control - RIIHAN305D

RIIHAN305D Operate a Gantry or Overhead Crane, Nationally Recognised Statement of Attainment

More Information
HRW CV, Licence to Operate a Vehicle Loading Crane (Capacity 10 metre tonnes or above) - TLILIC0024

HRW CV, Licence to Operate a Vehicle Loading Crane (Capacity 10 metre tonnes or above) - TLILIC0024 , Nationally Recognised Training

More Information
HRW C2, Licence to Operate a Slewing Mobile Crane (Up to 20 Tonnes) - TLILIC0022

This licence allows you to operate a Mobile Slewing Crane up to 20 Tonne. It also allows you to operate a Non-Slewing Crane (CN), Vehicle Loaded Crane (CV) & Telehandler over 3 tonne.

More Information
Licence to Operate a Reach Stacker (greater than 3 tonnes capacity) - TLILIC0011

Licence to Operate a Reach Stacker (greater than 3 tonnes capacity) - TLILIC0011, Nationally Recognised Training

More Information
HRW C6 - Slewing Mobile Crane up to 60 Tonnes - TLILIC0023

TLILIC0023 - Licence to Operate a Slewing Mobile Crane up to 60 Tonnes, Nationally Recognised Training

More Information
After Hours CO - Licence to Operate a Slewing Mobile Crane (Over 100 Tonnes) - TLILIC0020

HRW CO - TLILIC0020 - Licence to Operate a Slewing Mobile Crane (Over 100 Tonnes), Nationally Recognised Training

More Information

Press enter to see more results