Improve your experience. We are very sorry but this website does not support Internet Explorer. We recommend using a different browser that is supported such as Google Chrome or Mozilla Firefox.

HRW RA - Licence to Perform Rigging Advanced Level - CPCCLRG4001

HRW RA - Licence to Perform Rigging Advanced Level - CPCCLRG4001, Nationally Recognised Training

Description

This Nationally Recognised HRW Advanced Rigging course is designed to equip participants with the skills and knowledge to: Perform Advanced Rigging work associated with the Rigging of Gin Poles, Shear Legs, Flying Foxes & Cable Ways, Guyed Derricks, Structures, & Suspended & Fabricated Hung Scaffolds. Crane is a crane mounted on a vehicle used for loading and unloading the vehicle.  

 

COURSE TOPICS 

  • Requirements for HRW Licence. 
  • OH&S Legislation (Acts, Regulations and Duty of Care) 
  • Application of Australian Standards and National Standards. 
  • Fall Prevention (Harness/lanyard inspection and applications) 
  • Personal and general safety
  • Rigging a span rope or flying fox
  • Installing a swinging stage or bosuns chair
  • Set up a gin pole to conduct a lift
  • Erect and dismantle a hung or suspended scaffold
  • Learning bends and hitches (knots)

 

PREREQUISITES & HRW LICENCE ASSESSMENT REQUIREMENTS 

To enrol in this course participants must:

  • It is a mandatory requirement to hold a qualification in Intermediate Rigging,  to be eligible to enrol for this Advanced course
  • You must be able to show evidence of your attainment of the Intermediate Rigging course - Once you have placed your order, please send evidence of the above qualification to admin@iwpt.com.au. - Your registration will not be approved until this has been received.
  • You are required to have either a HRW Licence to operate a Boom Type EWP Boom Length 11m or More or have completed the Operate Elevated Work Platform Under 11M Course - Please contact us for a bundle price for EWP Course if required, when booking the Rigging Intermediate Course
  • Be a minimum of 18 years of age
  • Bring 100 points of identification on the first day of the course and on the assessment day. If using a birth certificate or a passport, it must be the original evidence of identity document, a photo of the document will not be accepted, a photo of a driver's licence, high-risk work licence, and Medicare card on the NSW service site on your phone is acceptable.

The link below outlines the acceptable evidence of identity and points value:

https://www.safework.nsw.gov.au/__data/assets/pdf_file/0005/51836/SW08446-0718-423971.pdf

  • Participant's identification must show a NSW residential address, if you are an interstate participant an exemption must be in place before you can undergo the assessment
  • Inform IWP if you are an accredited SafeWork NSW licenced assessor, an exemption must be in place before you can undergo the assessment
  • To allow for adequate time for an exemption to be granted please notify IWP during enrolment as we can assist with the exemption process.
  • Demonstrate the ability to speak and write English to a basic level & have basic numeracy skills
  • Be able to speak English well enough to carry out high-risk work safely with other people, please inform us upon registration if you feel you have any literacy or numeracy difficulties. Some reasonable adjustments to the course can be made to assist.

 

COURSE DURATION

  • 5 Days

 

PARTICIPANTS WILL NEED TO BRING

  • 100 points of identification as listed in the prerequisites for this course
  • Bring your own food, free water, tea, coffee & biscuits are provided, you will be able to leave the facility during your lunch break if you wish
  • PPE including protective footwear will be required to be worn for the practical training sessions and the SafeWork NSW assessment, we have hard hats, high visibility vests, gloves & whistles available for use if required.

 

ASSESSMENT PROCESS

  • The course is based on the requirements of the national standards for licencing persons performing high-risk work, the training will be a combination of knowledge, calculations & practical training where participants will be required to demonstrate industry skills & knowledge described in the units of competency included in this course.
  • On completion of the training, an RTO assessment will be conducted, this assessment will identify if the participant is ready to undergo the SafeWork NSW assessment, or if further training is required.
  • To pass the SafeWork NSW assessment, all critical components must be demonstrated and answered correctly

 

COURSE OUTCOME

On successful completion of the SafeWork NSW assessment, participants will be given a:

  • Nationally recognised statement of attainment HRW RA - Licence to Perform Rigging Advanced Level - CPCCLRG4001, recognised within the Australian Qualifications Framework and issued under the authority of the National Vocational Education and Regulator Act 2011
  • A SafeWork NSW licence to perform high-risk work application form is to be lodged at Australia Post within 60 days of the completion of the assessment.

 

MAXIMUM PARTICIPANTS

  • 8 people 

 

UNIT OF COMPETENCY

  • HRW RA - Licence to Perform Rigging Advanced Level - CPCCLRG4001

 

PRICE

  • $1400
  • For your registration into a course to be approved, all course fees are required to be paid in full at the time you make your booking.

 For all cancellations for our Intermediate or Advanced Courses, min 50% of the course fee is non refundable.

Any cancellations made within 24 hours from the course start date will result in the full course fees being non refundable.

 

PAYMENT OPTIONS

  • CREDIT CARD - over the phone or the ONLINE CREDIT CARD payment option through our website (preferred) 1.75% surcharge will apply 
  • EFTPOS
  • INVOICE (an approved 7-day credit application must be in place, available to corporate customers only)
  • Individuals registering for a course must use the credit card payment option

 

REFUND POLICY

  •  For all cancellations for our Intermediate or Advanced Courses, min 50% of the course fee is non refundable.

    Any cancellations made within 24 hours from the course start date will result in the full course fees being non refundable.

    Please refer to our refund policy in the terms and conditions on our website,
  • https://www.iwpt.com.au/w/termsandconditions/

 

RECOGNITION OF PRIOR LEARNING (RPL)

  • Participants should speak with the IWP administration team at the time of enrolment to further discuss this option

 

IWP CONTACT DETAILS & RTO INFO

  • Address: 37 Kemblawarra Road Warrawong NSW 2502
  • Phone: 02 42743864
  • Email: admin@iwpt.com.au
  • Website: https://www.iwpt.com.au
  • RTO Code 91671
  • ABN 18133156993

 

 

Similar courses

HRW RI - Licence to Perform Rigging Intermediate Level - CPCCLRG3002

HRW RI - Licence to Perform Rigging Intermediate Level - CPCCLRG3002, Nationally Recognised Training

More Information
After Hours - Licence to Perform Rigging Basic Level - CPCCLRG3001

CPCCLRG3001 - Licence to Perform Rigging Basic Level HRW-RB, Nationally Recognised Training

More Information
HRW - Licence to Perform Rigging Basic Level - CPCCLRG3001

CPCCLRG3001 - High Risk Work Licence to Perform Rigging Basic Level - Nationally Recognised Training

More Information
After Hours - Licence to Perform Rigging Intermediate Level - CPCCLRG3002

CPCCLRG3002 Licence to Perform Rigging Intermediate Level HRW RI, Nationally Recognised Training

More Information
Weekend Course - Licence to Perform Rigging Intermediate Level - CPCCLRG3002

CPCCLRG3002 Licence to Perform Rigging Intermediate Level - HRW RI, Nationally Recognised Training

More Information

Press enter to see more results